Top Semiconductor Stocks For 2014

Bouncing back from midday lows, the S&P 500 Index (SNPINDEX: ^GSPC  ) overcame early deficits, ending the day 13 points, or 0.9% higher, closing at 1,622. The big news tomorrow will be the Labor Department's monthly employment report, which takes a gauge of private and public sector payrolls. Investors in today's three biggest laggards, however, couldn't retain any sense of optimism, and all three ended Thursday in the dregs of the S&P.

J.M. Smucker (NYSE: SJM  ) was the most pronounced decliner of the day, losing 3.9% on the heels of a disappointing earnings forecast. Strangely enough, Smucker's quarter wasn't all that bad, and the company handily beat profit expectations. The red flag for investors, though, was the fact that sales declined for the first time in years; on top of that, earnings forecasts for the current fiscal year were on the low end of expectations.

Semiconductor chip designer Altera (NASDAQ: ALTR  ) slipped 3.2% Thursday, despite a lack of major company-related news on the day. This week, however, saw a material change in the prospects for Altera's stock: On Monday, the company announced a whopping 50% boost in its quarterly dividend, raising it from $0.10, to $0.15. With an annual dish-out of $0.60 per share, Altera's annual payout sits at 1.9%.�

5 Best Integrated Utility Stocks To Own For 2015: NextStage Inc (NXT)

NextStage, Inc. is a holding company. The Company is engaged in the management of its investments in shares of stocks of its subsidiaries. The Company�� subsidiaries include Mondex Philippines Inc. (MXP), Infinit-e Asia Inc. (Infinit-e Asia) and Technology Support Services, Inc. (TSSI). MXP operates a multi-application smart card system in Philippines. Infinit-e Asia is a software development company specializing on smart card and e-commerce solutions tailored to enhance the business of its clients. Infinit-e Asia develops smart card solutions for both real and online applications and on both contact and contactless platform. Infinit-e Asia�� spectrum of products and applications are classified as payments, data capture and security. TSSI is engaged in the business of business process outsourcing (BPO), applications service providers (ASP) and managed service providers (MSP). Advisors' Opinion:

• [By Namitha Jagadeesh]

  HSBC Holdings Plc (HSBA), Europe�� largest bank, slid 2.1 percent. International Consolidated Airlines Group SA (IAG) declined 2 percent as it canceled some of its flights following a disruption caused by one of its planes at Heathrow airport. Next Plc (NXT) retreated 2.4 percent as Morgan Stanley cut its recommendation on the shares.

Top Semiconductor Stocks For 2014: Advantest Corp (ATE)

Advantest Corporation, incorporated in December 1954, is a part of Advantest group. The Company operates in three segments: semiconductor and component test system segment; mechatronics system segment, focusing on peripheral devices including test handlers and device interfaces, and services, support and others segment. The semiconductor and component test system segment provides customers with test system products for the semiconductor industry and the electronic component industry. The mechatronics system segment focuses on peripheral devices to the semiconductor and component test systems. The services, support and others segment consists of comprehensive customer solutions provided in connection with the semiconductor and component test system and mechatronics system segments, support services and an equipment lease business.

Semiconductor and Component Test Systems Segment

Semiconductor and component test systems are used during the semiconductor and electronic component manufacturing process to confirm that a semiconductor functions properly. Semiconductor and component test systems consist of test systems for memory semiconductors and test systems for non memory semiconductors. Advantest�� test systems for memory semiconductors are test systems designed to test high-speed/high performance dynamic random access memory (DRAM) semiconductors used in equipment such as personal computers and servers, as well as flash memory semiconductors used in digital consumer products.

Test systems for memory semiconductors consist of a mainframe and one or more test heads. During testing, a device interface is attached to the test head. During the front-end testing process, wafers are loaded by a prober and are connected to the test system for memory semiconductors through the device interface. Electric signals between the die and the test systems for memory semiconductors are transmitted through probe pins located in the device interface and tested. After front-end te! sting is completed, the wafer is diced into separate dies and properly functioning dies are packaged. During back-end testing, test handlers are used to load these packaged devices onto the test heads, and electric signals are transmitted between the devices and the test heads via the device interface and tested. The test results are analyzed by the test systems for memory semiconductors��hardware circuits and software programs. Customized software programs for each semiconductor are required to analyze the semiconductor tests and test data.

Advantest�� main product lines of test systems for memory semiconductors are the T5500 series, the T5300 series and the T5700 series. The T5593 is a test system targeted at the market for high speed memory semiconductors, such as DDR2- Synchronous Dynamic Random Access Memory (SDRAM) and Synchronous Graphics Random Access Memory (SGRAM). The T5383 is a multi-functional test system for memory semiconductors that reduces testing costs for semiconductor manufacturers. Advantest�� main line of test systems for non memory semiconductors relates to test systems for SoC semiconductors, test systems for liquid crystal display (LCD) driver integrated circuits and test systems for semiconductors used in car electronics. The T6577 test systems for SoC semiconductors in the T6500 series were primarily developed to test micro controller unit (MCU) and SoC semiconductors that control digital consumer products at the production lines. The T6300 series are test systems for LCD driver integrated circuits used with high-definition LCD displays. The T7721, T7722 and T7723 are test systems for non memory semiconductors for mixed signal integrated circuits. The T8571A is a test system for non memory semiconductors that is primarily used to evaluate and analyze CCDs which are image sensors.

Mechatronics System Segment

The Main products in the Mechatronics System Segment are test handlers which handle semiconductor devices and automate the te! sting, an! d device interfaces which are the interfaces with devices being tested. Test handlers are used with semiconductor and component test systems to handle, condition temperature, contact and sort semiconductors and other electronic components during the back-end testing of the semiconductor manufacturing process. Advantest�� test handlers are sold primarily in conjunction with the sale of its semiconductor and component test systems. The M6242 test handler for test systems for memory semiconductors, including DDR-3SDRAM, can handle up to 512 semiconductors at a time. Advantest�� test handlers for non memory semiconductors, including SoC semiconductors, are the M4841, the M4741A and the M4742A, among others.

Advantest develops and manufactures device interfaces for semiconductor and component test systems and supplies device interfaces, such as high performance and high density connectors, socket boards and sockets. For test systems for memory semiconductors, Advantest provides motherboards capable of handling a maximum of 512 semiconductors at a time. For test systems for non memory semiconductors, Advantest provides motherboards that are compatible with a maximum of 3,072 signals. Advantest also provides motherboards designed for use in front-end testing. Advantest provides custom manufacturing of socket boards and performance boards for each device under test in accordance with customers��specifications.

Advantest provides sockets for test systems for memory semiconductors. Advantest provides low-inductance (0.4nH) sockets and fine pitch (0.4mm) sockets for semiconductors that are becoming more high-speed and more compact in size. Advantest provides carrying and contacting mechanism components compatible with each device under test for test handlers for memory semiconductors and test handlers for non memory semiconductors.

Services, Support and Others Segment

In the services, support and others segment, Advantest has focused on maintenance serv! ices, suc! h as installation and repair of Advantest�� products. It also focused on lease and rental services of its products as a part of Advantest�� effort to provide customers with comprehensive solutions.

The Company competes with Teradyne, Inc., Verigy Ltd., LTX-Credence Corporation, Yokogawa Electronic Corporation, FROM30 CO., LTD., EXICON Ltd., UniTest Inc., Delta Design, Inc., Seiko Epson Corporation, Mirae Corporation, TechWing, Inc., TSE Co., Ltd. and Secron Co., Ltd.

Advisors' Opinion:

• [By Dan Carroll]

  Nissan's done better this year than electronics maker Advantest (NYSE: ATE  ) , but this stock absolutely blew up over the past week. Advantest's shares shot higher by more than 9%, wiping out pessimism over the company's weak earnings released a few weeks ago. Advantest's net loss and operating profit both fell below its guidance, and despite this week's investor optimism, the future's murky for this company. Financial site TheStreet downgraded the stock last week, citing Advantest's falling earnings, among other issues.

Top Semiconductor Stocks For 2014: Aeroflex Holding Corp (ARX)

Aeroflex Holding Corp. (Aeroflex Holding) is a provider of radio frequency (RF) and microwave integrated circuits, components and systems used in the design, development and maintenance of wireless communication systems. The Company�� solutions include microelectronic components and test and measurement equipment used by companies in the space, avionics and defense; commercial wireless communications, and medical and other markets. Its products include a range of RF, microwave and millimeter wave microelectronic components, integrated circuits (ICs), and analog and mixed-signal devices. It also manufactures a range of RF and microwave wireless radio and avionics test equipment and solutions particularly for the wireless, avionics and radio test markets. The Company operates in two segments: Aeroflex Microelectronics Solutions (AMS) and Aeroflex Test Solutions (ATS). In August 2010, it acquired Advanced Control Components. In September 2013, the Company announced the sale of its Aeroflex Test Equipment Services (ATES) business to Trescal Limited. In February 2014, Aeroflex Holding Corp announced the acquisition of Shenick Network Systems.

Aeroflex Microelectronic Solutions

AMS offers a range of microelectronics products and is a provider of specialty products for the space, avionics, defense, commercial wireless communications, medical and other markets. RadHard products are specifically designed to tolerate high radiation level environments, which otherwise can degrade electronic components. The Company principally operates on a fabless semiconductor manufacturing model, outsourcing virtually all front-end semiconductor fabrication activities to commercial foundries. AMS offers a range of complementary products that provide connectivity and computing functionality for applications. Its product portfolio includes RF, microwave and millimeter wave products, including discrete components, ICs, monolithic microwave ICs and multi-chip modules.

AMS designs and manu! factures application specific, analog and mixed-signal devices for use in medical, industrial and intelligent sensors. The Company�� AMS products are used in over 100 space, avionics and defense platforms, including the Wideband Global Satellite Communications satellites, the Geostationary Operational Environmental satellites, the Advanced Extremely High Frequency satellites, the Boeing 777 airliner's databus, the F-16's modular mission computer, the B-1 flight controls upgrade and the Terminal High Altitude Area Defense program. Its AMS products are also used in wireless communications platforms, including WCDMA and LTE cellular base station systems, as well as point-to-point broadband radio applications. In the medical area, our products are used by two of the top four manufacturers of CT scan equipment.

AMS provides HiRel standard and custom integrated circuits and circuit card assembly for the aerospace, altitude avionics, medical, x-ray cargo scanners, critical transportation systems, nuclear power controls, global positioning systems (GPS) receivers, networking and telecommunication markets. AMS' HiRel products include transceivers, analog multiplexers, clock management generators, MSI logic products, battery electronics units, voltage regulators, high-speed power controllers, MIL-STD 1553 bus controllers, remote terminals, bus monitors, microcontrollers and microprocessors, RadHard Pulse Width Modulation Controllers, RadHard Resolver-to-Digital and memory modules. HiRel Microelectronics/ Semiconductors have a typical life cycle of 10-20 years.

AMS provides a set of standard and application specific RF/microwave diodes and semiconductor devices. Microwave semiconductor products offered include diodes, amplifiers, resistors, inductors, capacitors, switches, and integrated devices. RF and Microwave active components and subsystems offered include PIN diode-based microwave control components, variable attenuators, phase shifters, limiters, time delay units and Multi-Funct! ion Micro! wave assemblies. AMS offers resistor products, which include a variety of low and high reliability power surface mounted passive devices for the wireless infrastructure and defense markets with applications in isolators, circulators, single and multi-carrier power amplifiers and circuits. Passive components offered include attenuators, terminations, adapters, DC blocks, and other components for commercial, military and laboratory applications. Other products include power amplifiers, up and down converters, mixers, filters and micro-receivers operating to over 40 giga hertz (GHz). RF and Microwave components have a typical life cycle of 5-15 years. The Company�� motion control products provide complete and integrated motion control solutions for space (both military and commercial), military, avionics, and industrial customers. Its product line offerings include actuators and mechanisms, electronic controllers, slip rings and twist capsules, DC motors and Gimbal Systems. Motion control products have a typical life cycle of 10-20 years.

Aeroflex Test Solutions

ATS is a provider of a line of specialized test and measurement hardware and software products, primarily for the space, avionics, defense, commercial wireless communications and other markets. ATS products and their applications include wireless test equipment, which is used to develop and test handsets and base stations; military radio and PMR test equipment, which is used by radio manufacturers and military, police, fire, and emergency response units to test handheld radios; avionics test equipment, which is used in the design, manufacture and maintenance of electronics systems for aircraft; synthetic test equipment, which is used to test satellites and transmit / receive modules prior to launch and deployment, and general purpose test equipment, including spectrum analyzers and signal generators.

Wireless Test Equipment is used by wireless service providers and equipment manufacturers to test wireless ! handsets ! and base stations. The Company offers a range of cellular tests across a range of wireless standards and communication frequencies, including 2G and 3G, with particular capability in EDGE protocols, and the new 4G LTE/LTE(A) protocols. Products include a range of system, protocol, physical layer and parametric test solutions, such as the TM500 test mobile, RF synthesizers, digitizers and combiners, and application software. In addition, ATS provides PXI-based products which are modular scalable solutions for the handset manufacturing environment. Product applications include research and development, conformance, manufacturing/production, installation and commissioning, field service, and network optimization.

ATS Radio Test Equipment is used by radio manufacturers and military, police, fire and emergency response units to test handheld radio units. ATS provides TErrestrial Trunked Radio (TETRA), and Project 25 (P25), radio test equipment, addressing both mobile and repeater test applications. TETRA is a global standard for private mobile radio (PMR), systems used by emergency services, public transport and utilities. P25 is a standard for digital radio communications for use by federal, state, private, and local public safety agencies in North America. Its military communications testing systems are primarily used by the United States military to test complex voice and data frequency hopping radios and accessories. Military radio and PMR test equipment has a typical life cycle of 5-20 years.

Avionics test equipment is used in the design, manufacture, test and maintenance of commercial, civil and military airborne electronic systems, or avionics. ATS equipment provides the stimulus and signals necessary for certification, verification, fault finding and diagnosis of airborne systems on the ground. For civil and commercial aviation, it has test solutions for various transponder modes, communications frequencies, emergency locator transmitters, weather radars and GPS systems. F! or milita! ry aviation, it has test solutions for microwave landing systems, tactical air navigation, enhanced traffic alert and collision avoidance systems, various identification friend or foe, or IFF, transponder/interrogator modes and IFF monopulse antenna simulation. ATS also provides customized avionics test solutions to support manual and automatic test equipment for manufacturing, repair and ground support operations. Avionics test equipment has a typical life cycle of 8-15 years.

Synthetic test systems test several attributes through one box and can take multiple complex measurements simultaneously. ATS provides synthetic test environment that allows digital, analog, RF/microwave and power test of circuits, modules, subsystems and complete systems for commercial, military, and aerospace customers. ATS' STI 1000C+ and TRM 1000C products offer synthetic microwave test systems optimized for testing Transmit/Receive modules and satellite payloads in a factory setting. Its SMART^E and SMART^E 5300 products offer a modular approach for implementing multi-function configurable and reconfigurable test systems. Synthetic test solutions products have a typical life cycle of 10-15 years.

ATS offers a variety of general purpose test solutions including microwave test solutions, counters and power meters. ATS microwave test solutions cover frequency ranges from 1 megahertz (MHz) to 46 gigahertz (GHz), with various tracking, offset, continuous wave, modulated source, fault location, and group delay configuration options provided. ATS power meters are designed for field use, automated test equipment requirements and standard bench applications. General purpose test solutions have a typical life cycle of 4-7 years.

The Company Competes with Agilent Technologies, Honeywell, BAE Systems, Hittite Microwave Corporation, ILC / Data Devices Corporation, Microsemi, Anaren, Anite, Anritsu, Rohde & Schwarz, Spirent and National Instruments.

Advisors' Opinion:

• [By Jake L'Ecuyer]

  Leading and Lagging Sectors
  In trading on Tuesday, technology shares were relative leaders, up on the day by about 0.12 percent. Leading the sector was strength from Aeroflex Holding (NYSE: ARX) and Canadian Solar (NASDAQ: CSIQ). Cyclical consumer goods & services shares declined around 0.71 percent in Tuesday's trading.

• [By Rich Smith]

  The Department of Defense issued some 22 separate contract awards Thursday, totaling just under $1 billion in combined value. Not all of them went to publicly traded defense contractors, of course, but enough of them did to be worth mentioning. Here are a few of the lucky winners:

Top Semiconductor Stocks For 2014: Xilinx Inc (XLNX)

Xilinx, Inc. (Xilinx), incorporated on February 5, 1984, designs, develops and markets programmable platforms. These programmable platforms have a number of components, including integrated circuits (ICs) in the form of programmable logic devices (PLDs), including Extensible Processing Platforms (EPPs); software design tools to program the PLDs; targeted reference designs; printed circuit boards, and intellectual property (IP), which consists of Xilinx and various third-party verification and IP cores. In addition to its programmable platforms, Xilinx provides design services, customer training, field engineering and technical support. The Company�� PLDs include field programmable gate arrays (FPGAs), complex programmable logic devices (CPLDs) that its customers program to perform logic functions, and EPPs. Xilinx�� products are offered to electronic equipment manufacturers in end markets, such as wired and wireless communications, industrial, scientific and medical, aerospace and defense, audio, video and broadcast, consumer, automotive and data processing. The Company sells its products globally through independent domestic and foreign distributors and through direct sales to original equipment manufacturers (OEMs) by a network of independent sales representative firms and by a direct sales management organization. In January 2011, the Company acquired AutoESL Design Technologies, Inc. In August 2012, the Company acquired embedded Linux solutions provider PetaLogix.

Product Families

The 7 series devices that comprise the Company�� 28-nanometer (nm) product families are fabricated on a high-K metal gate 28-nm process technology. These devices are based on an architecture, which enables design and IP portability and re-use across all families, as well as provides designers the ability to achieve the appropriate combination of I/O support, performance, feature quantities, packaging and power consumption to address a range of applications. The 7 series devices consist of! three families: Virtex-7 FPGA, Kintex-7 FPGAs and Artix-7 FPGAs. The Zynq-7000 family is the family of Xilinx EPPs. The Virtex-6 FPGA family consists of 13 devices and is the sixth generation in the Virtex series of FPGAs.

Virtex-6 FPGAs are fabricated on a high-performance, 40-nm process technology. There are three Virtex-6 families: Virtex-6 LXT FPGAs, Virtex-6 SXT FPGAs and Virtex-6 HXT FPGAs. The Spartan-6 family is the PLD industry�� 45-nm high-volume FPGA family, consisting of 11 devices in two product families: Spartan-6 LX FPGAs and Spartan-6 LXT FPGAs. The Virtex-5 FPGA family consists of 26 devices in five product families: Virtex-5 LX FPGAs for logic-intensive designs, Virtex-5 LXT FPGAs for high-performance logic with serial connectivity, Virtex-5 SXT FPGAs for high-performance DSP with serial connectivity, Virtex-5 FXT FPGAs for embedded processing with serial connectivity and Virtex-5 TXT FPGAs for high-bandwidth serial connectivity. Prior generation Virtex families include Virtex-4, Virtex-II Pro, Virtex-II, Virtex-E and the original Virtex family. Spartan family FPGAs include 90-nm Spartan-3 FPGAs, the Spartan-3E family and the Spartan-3A family. Prior generation Spartan families include Spartan-IIE, Spartan-II, Spartan XL and the original Spartan family.

Design Platforms and Services

The Company offers three types of programmable platforms. The Base Platform is the delivery vehicle for all of its new silicon offerings used to develop and run customer-specific software applications and hardware designs. The Base Platform consists of FPGA silicon; Integrated Software Environment (ISE) Design Suite design environment; integration support of optional third-party synthesis, simulation, and signal integrity tools; reference designs; development boards and IP. The Domain-Specific Platform targets one of the three primary Xilinx FPGA user profiles: the embedded processing developer; the DSP developer; or the logic/connectivity developer. The Market-S! pecific P! latform enables software or hardware developers to build and run their specific application or solution. Built for specific markets, such as automotive, consumer, aerospace and defense, communications, audio, video and broadcast, industrial, or scientific and medical, the Market-Specific Platform integrates both the Base and Domain-Specific Platforms.

During April 2012, Xilinx introduced the Vivado Design Suite. Vivado supports Xilinx 7 series FPGAs and Zynq EPPs. Xilinx and various third parties offer hundreds of no charge and fee-bearing IP core licenses covering Ethernet, memory controllers Interlaken and PCIe interface, as well as domain-specific IP in the areas of embedded, DSP and connectivity, and market-specific IP cores. The Company also offers development kits, including hardware, design tools, IP and reference designs. Xilinx offers a range of configuration products, including one-time programmable and in-system programmable storage devices to configure Xilinx FPGAs. These programmable read-only memory (PROM) products support all of the Company�� FPGA devices. Xilinx and certain third parties have developed and offer a ecosystem of IP, boards, tools, services and support through the Xilinx alliance program. Xilinx also works with these third parties to promote its programmable platforms through third-party tools, IP, software, boards and design services. Xilinx engineering services provide customers with engineering, ranging from hands-on training to full design creation and implementation.

The Company competes with Altera Corporation, Lattice Semiconductor Corporation and Microsemi Corporation.

Advisors' Opinion:

• [By Marc Bastow]

  Programmable devices and technologies designer Xilinx (XLNX) raised its quarterly dividend 11.5% to 29 cents per share, payable June 4 to shareholders of record as of May 14.
  XLNX Dividend Yield: 2.33%

• [By Daniela Pylypczak]

  Xilinx, Inc. (XLNX) announced its earnings results for its second quarter fiscal 2014 on Wednesday after the closing bell.

  The company reported earnings of 58 cents per share, beating analysts’ estimates of 53 cents. Revenue was reported at $598.94 million, above the expected $588.28 million and a 3% increase from the prior quarter and up 10% from a year prior.

  Xilinx also reported that it expects sales to be up 2% to down 2% sequentially. Gross margin is expected to be approximately 69% for the December quarter fiscal 2014.

  Xilinx shares traded 1.19% higher during Wednesday’s session. Year-to-date, the stock is up 25.02%.